230v ac to 12v 24v 48v dc pcb medical power supply
200 WATT MEDICAL AC-DC POWER SUPPLY WITH PFC
* Universal Input Range 90~264Vac * 2"x 4" Open Frame/CFM200M * 180W with Natural Convection @220Vac/CFM200M * 200W with Natural Convection @220Vac/CFM200MXXXC * Active PFC Meets EN61000-3-2 * No Load Power Consumption<0.3W * High Power Density Up to 16.9W/Inch3/CFM200M * +12V Fan Output * High Efficiency up to 93.5% * Meet Class II & Class I * Meets 2 MOPP
Ripple & Noise NOTE 1
Voltage Accuracy NOTE 2
Line Regulation NOTE 3
Load Regulation NOTE 4
% EFF. (typ. )
Main Output Voltage
Fan Output Voltage
Typical at 25℃ , 230Vac and 60% rated load, unless otherwise specified
1. Add a 0.1uF ceramic capacitor and a 47uF E.L. capacitor to output for ripple &noise measuring @20MHz BW. 2. Voltage accuracy is set at 60% rated load and 25℃ Ta. 3. Line regulation is measured from High Line to Low Line with rated load. 4. Load regulation is measured from full to 10% rated. 5. Typical efficiency at 230 VAC and full load at 25℃. 6. 12V/0.3A with nature convection; 12V/0.5A with 10 CFM air flow, tolerance ±10% at main output 10-100% full load. 7. Need an external 1mH choke at input for Class II type to pass EN55011 Class B. 8. Input connectors (CN1) wafer with TAIWAN KING PIN TERMINAL PVHI series and mate with JST Housing VHR series or
equivalent. 9. Fan output connector wafer with TOWNES ENTERPRISE 2001BW series and mate with JST Housing PHR series and
JST SPH series crimp terminal or equivalent.
10. Output connectors (Vo+ & Vo- with M3 screw) mate with round terminal and round terminal of the max outer diameter
is 6.75mm, max inner diameter is 3.9mm.
AC Input Voltage
47 to 63Hz
100A max. @240Vac
Leakage Current (Earth)
260uA typ., 300uA max.
Touch Current (CFM200MXXXC)
75uA typ., 100uA max.
Total Rated Output Power
Over Voltage Protection
Recycle AC input to restart
Short Circuit Protection
Hiccup mode(Auto Recovery)
Input to output = 4000VAC
Over Temperature Protection
- 20 ~ 80℃ (see Derating Curve)
93% RH max. Non condensing
MTBF- MIL-HDBK-217F, GB, 25℃/115VAC
Open frame versions ....... 4.000x2.000x1.480 Inches(101.60x50.80x37.60mm)
EN55011 Class B, FCC CFR 47 pat 18 IEC61000-3-2, 3, IEC61000-4-2, 3, 4, 5, 6, 8, 11
Safety (Ed. 3.1)
IEC60601-1:2005+A1:2012 EN60601-1:2006+A11:2011+A1+A12, UL ANSI/AAMI ES60601-1
Cincon Electronics Co., Ltd. is a global supplier of switch mode power conversion products to the communications, computer, industrial, medical, consumer and lighting markets. We design and manufacture industry standard, RoHS compliant, DC-DC converters, AC-DC power supplies and LED power supplies. Our current offerings comprise over 3000 standard products including single & multiple output DC-DC converters from 1W to 700W , single & multiple output AC adapters from 5W to 150 W, open frame AC-DC power supplies from 5W to 1600W and LED power supplies from 16W to 150W. Cincon also offers modified standard and custom power conversion products. We're expert in the design and manufacture of power supplies engineered to customer requirements. Emphasis is placed on reliability, rapid prototyping and adherence to cost targets. Products are designed-for-manufacturability using the latest simulation techniques, test equipment and computer aided design tools. Our wholly owned, ISO 9001 & 14001 factories in Taiwan and China are outfitted with state-of-the art manufacturing equipment, including SMT pick-and-place assembly machinery. Quality and process control is insured using a variety of statistical sampling and analysis techniques throughout the manufacturing cycle. In addition, all products must pass a rigorous burn-in and fully automated final test before shipment. Our power supplies are engineered to meet worldwide safety standards. All AC-DC products and a variety of DC-DC products are UL listed or recognized; TUV approved and carry the CE mark. Cincon also certifies to other international safety standards, including PSE and CCC, on request. Products are also designed to meet the various international EMI standards.