* Universal Input Range 90 ~ 264Vac * Active PFC Meets EN61000-3-2 * High Efficiency up to 94% * High Power Density up to 14.1W/Inch3 * Meets EN55011 Class B * Meets 2MOPP * Over Temperature Protection * Continuous Short Circuit Protection * Remote Voltage Sense * PS On/Off Remote Control * Power Good & Power Fail Signal * +5V Stand-by Output Power * 12V Fan Output * No Load Power Consumption<0.3W NOTE6 * 3"x 5" Size
Rated 1: Forced air convection Rated 2: Natural convection For covered versions add "C" to model number or order part no. For example CFM300M120C
AC Input Voltage
100Vac/4A max., 240Vac/1.8A max.
47 to 63Hz
Cold start@25℃ 30A max. @240Vac
180uA typ., 300uA max.
Input to Output = 4000VAC
20ms typ. @115Vac
Over Voltage Protection
Short Circuit Protection
Hiccup Mode (Auto Recovery)
-40~80℃ (see derating curve)
Over Temperature Protection
Power On: PS-On≦2V (note 12)
Power Off: PS-ON=11-16V, Open Circuit
Power Good/Power Fail(PG)
The TTL goes high with 50ms to 250ms after power set up
The TTL goes low at least 5ms before Vo below 90% rated value
93% RH max. Non condensing
Natural convection for 200W~250w(see derating curve)
f o r c e d a i r c o n v e c t i o n ( 1 0 C F M ) f o r 3 0 0 W
60~80KHz typ. @ Full Load
MTBF- MIL-HDBK-217F, GB, 25℃/115VAC
Open frame versions ........... 5.000x3.000x1.421 Inches (127.00x76.20x36.1mm)
EN55011 Class B, FCC CFR 47 Part 18 IEC61000-3-2(3), IEC61000-4-2(3, 4, 5, 6, 8, 11)
Safety (Ed. 3.1)
IEC60601-1:2005+A1:2012 IEN60601-1:2006+A11:2011+A1+A12, UL ANSI/AAMI ES60601-1
1. Add a 0.1uF ceramic capacitor and a 10uF E.L. capacitor to output for ripple &noise measuring @20MHz BW 2. Voltage accuracy is set at 100% rated load and 25℃.Ta. 3. Line regulation is measured from high line to low line with rated load. 4. Load regulation is measured from full to 10% load. 5. Typical efficiency at 230 VAC and full load at 25°C 6. No load power consumption<0.3W by PS on/off remote control. 7. Input connector (CN1) wafer with TAIWAN KING PIN TERMINAL PVHI series and mate with JST housing VHR series or
8. Optional Input connector (CN1) wafer with LONG CHU P3060 series and mate with MOLEX housing 5195 series or
equivalent. 9. Output connector CN4 wafer with JST PH series and mate with JST housing PH series or equivalent. 10. Output connector CN5 wafer with TAIWAN KING PIN TERMINAL P110I series and mate with JST housing PH series or
equivalent. 11. Output connectors (Vo+ & Vo- with M3 screw) mate with round terminal and round terminal of the max outer diameter
is 6.75mm, max inner diameter is 3.9mm.
12. PS-ON and GND short, IPS-ON =4.5 mA typical.
Typical at 25℃ , 230Vac and 60% rated load, unless otherwise Specified
Cincon Electronics Co., Ltd. is a global supplier of switch mode power conversion products to the communications, computer, industrial, medical, consumer and lighting markets. We design and manufacture industry standard, RoHS compliant, DC-DC converters, AC-DC power supplies and LED power supplies. Our current offerings comprise over 3000 standard products including single & multiple output DC-DC converters from 1W to 700W , single & multiple output AC adapters from 5W to 150 W, open frame AC-DC power supplies from 5W to 1600W and LED power supplies from 16W to 150W. Cincon also offers modified standard and custom power conversion products. We're expert in the design and manufacture of power supplies engineered to customer requirements. Emphasis is placed on reliability, rapid prototyping and adherence to cost targets. Products are designed-for-manufacturability using the latest simulation techniques, test equipment and computer aided design tools. Our wholly owned, ISO 9001 & 14001 factories in Taiwan and China are outfitted with state-of-the art manufacturing equipment, including SMT pick-and-place assembly machinery. Quality and process control is insured using a variety of statistical sampling and analysis techniques throughout the manufacturing cycle. In addition, all products must pass a rigorous burn-in and fully automated final test before shipment. Our power supplies are engineered to meet worldwide safety standards. All AC-DC products and a variety of DC-DC products are UL listed or recognized; TUV approved and carry the CE mark. Cincon also certifies to other international safety standards, including PSE and CCC, on request. Products are also designed to meet the various international EMI standards.