* Universal Input Range 90 ~ 264Vac * Active PFC Meets EN61000-3-2 Class C&D * High Efficiency up to 94% * High Power Density up to 14.1W/Inch3 * Meets EN55032 and EN55022 Class B * Over Temperature Protection * Continuous Short Circuit Protection * Remote Voltage Sense * PS On/Off Remote Control * Power Good & Power Fail Signal * +5V Stand-by Output Power * 12V Fan Output * No Load Power Consumption<0.3W NOTE6 * 3"x 5" Size
Rated 1: Forced air convection Rated 2: Natural convection For covered versions add "C" to model number or order part no. For example CFM300S120C
1. Add a 0.1uF ceramic capacitor and a 10uF E.L. capacitor to output for ripple &noise measuring @20MHz BW. 2. Voltage accuracy is set at 100% rated load and 25℃.Ta. 3. Line regulation is measured from High Line to Low Line with rated load. 4. Load regulation is measured from Full to 10% load. 5. Typical efficiency at 230 VAC and full load at 25°C.
6. No load power consumption<0.3W by PS on/off remote control.
7. Input connector (CN1) wafer with TAIWAN KING PIN TERMINAL PVHI series and mate with JST housing VHR series
or equivalent. 8. Optional Input connector (CN1) wafer with LONG CHU P3060 series and mate with MOLEX housing 5195 series
9. Output connector CN4 wafer with JST PH series and mate with JST housing PH series or equivalent. 10. Output connector CN5 wafer with TAIWAN KING PIN TERMINAL P110I series and mate with JST housing PH series
or equivalent. 11. Output connectors (Vo+ & Vo- with M3 screw) mate with round terminal, and round terminal of the max outer diameter
is 6.75mm, max inner diameter is 3.9mm. 12. PS-ON and GND short, IPS-ON =4.5 mA typical.